4D Number Plates (3mm Depth)

4D 3mm number plates use laser-cut 3mm solid black acrylic characters bonded to a reflective BS AU 145e plate. The characters stand 3mm off the surface: clearly a raised plate, without the heavier shadow line of the 5mm style, and the lowest-profile 4D depth we make. Sold as a pair (front and rear) for cars and vans, made in County Durham by a DVLA-registered number plate supplier. Order before 2pm on a working day with your documents approved and we make them the same day.

How it is made

Every character is cut on a laser, so the edges are square and the corners are sharp on every letter and digit. The characters are Charles Wright at the prescribed size and spacing and are bonded with a high-strength adhesive to a white front or yellow rear reflective plate carrying our supplier name, postcode and the BS AU 145e mark. The 3mm character is also the base for our layered styles: Outline, Hover and Shadow all start from it, and the 4D gel plate adds a gel dome on top. If you want more depth, see the 4D 5mm plate. Our 4D number plates guide compares every style.

Is it road legal?

Yes, when the finished plate meets BS AU 145e. The standard is about the plate as a whole, not the depth of the characters: Charles Wright characters at the right size and spacing, a single shade of non-reflective black, a reflective white or yellow background with no tint or pattern, and a registered supplier's mark. Every 4D 3mm plate we make is built to it. What stops a camera reading a plate is tint, a patterned background, a non-standard font or spacing, or damage, not raised characters. Our guide to 3D and 4D number plate legality goes through the rules, ANPR and infrared in full.

A proposed BSI amendment that would stop the production of raised-character plates was consulted on until 13 December 2025 and is still under consideration; nothing has been adopted, BS AU 145e:2018 remains the current standard, and 4D plates remain legal to make, sell and fit. We have not been told when any change would take effect or how plates already fitted would be treated, and we will say so here as soon as we are. Checked 8 September 2026.

Sizes

A standard car plate is 520mm × 111mm. This style is also made as a shortened plate cut to your registration with a 16mm margin, a 4x4 square rear plate, an oversize rear plate, a hex plate and, as the only 4D depth we offer on a bike, the 4D motorbike plate.

Care

Wash the plate with the car. A pressure washer is fine at a sensible distance; solvents and abrasive polish are not. See cleaning your 3D or 4D number plates.

Warranty

36 months against manufacturing defects, which covers the plate, the print and the bond between character and plate. It does not cover damage from fitting, impact or chemicals.

What to order

Select 4D 3mm in the plate builder and the size you need, motorbike included. The documents we can accept as proof of the registration are listed under valid documents; postage choices are under delivery options.