FLASH SALE: 15% Off Plates & Accessories + FREE Fixing Kit Bundle | Use code FLASH15
Phone Lines Now CLOSED
Call Us: 0800 689 4795Oversize Number Plates (Range Rover, Bentley, etc.)
from £34.99
Oversize rear number plates measure 535mm × 152mm (21" × 6"), the wide, tall rear plate recess found on Range Rover, Range Rover Sport and Evoque, Land Rover Discovery, Bentley, Rolls-Royce and several Jaguar models, where a standard 520mm × 111mm plate leaves a visible gap. Any of our letter styles can go on them. Each plate is a reflective yellow BS AU 145e plate made in County Durham by a DVLA-registered number plate supplier, sold as a single rear plate. Order before 2pm on a working day with your documents approved and we make it the same day.
How it is made
An oversize rear number plate is made the same way as any rear number plate we sell. The registration is set on one line in Charles Wright characters at the prescribed size and spacing; the extra width and height of the plate go into the margins and the border, not into bigger characters, because the character size is fixed by the number plate regulations. The plate is reflective yellow and carries our supplier name, postcode and the BS AU 145e mark. Characters go on in the style you choose: printed, 3D gel, 4D 3mm, 4D 5mm, 4D gel, Outline, Hover, Shadow or Retro.
Is it road legal?
Yes, when the finished plate meets BS AU 145e and the number plate regulations. The regulations fix the character size, spacing and margin, not the outside size of a car plate; the standard covers the reflective plate, the single shade of black and the supplier mark. Every oversize plate we make meets both. Our guide to 3D and 4D number plate legality explains what the standard measures.
Other sizes
Check your recess before ordering: some 4x4s take a 4x4 square rear plate (279mm × 203mm) rather than a wide one. Pair it with a standard 520mm × 111mm front plate.
Warranty
36 months against manufacturing defects, which covers the plate, the print and the bond between character and plate. It does not cover damage from fitting, impact or chemicals.
What to order
Pick a letter style in the plate builder and select oversize as the rear size, with a standard front plate or on its own. Proof of registration is required first (valid documents); postage is under delivery options.
All our number plates are:
BS AU 145e compliant!
100% Road Legal
Adds next-level depth to your plates
Safe to pressure wash
Doesn't fade in the sun
Professionally laser cut
Industrial strength adhesive bonding
36 month warranty
The quickest way to be sure is to measure the rear recess rather than go by the model. If it is about 535mm × 152mm (21 x 6 inches), this is the plate. If it is square, you need a 4x4 square plate, and if a standard plate fills it with no gap, a standard 520mm × 111mm plate is right.
The front of these vehicles normally takes a standard 520mm × 111mm plate. In the plate builder, choose oversize as the rear size and add a standard front plate, or order the oversize plate on its own.
Yes. Any of our letter styles can go on an oversize rear plate, from printed to 3D gel and 4D. The characters stay the legal size; the extra space goes into the margins.
Order before 2pm on a working day with your documents approved and we make them the same day. Delivery options and times are in our FAQ, and the documents we can accept are on our valid documents page.